수용성방염제


PIRILAX-LUX

목재용 수성 방염액(PIRILAX-LUX)
 
1. Composition
 ① Ammophos : 10~20%
 ② Alkylphosphinic acids (oxyethylendiphosphinic acids) : 5~15%
 ③ Carbamide : 5%
 ④ Oxyphos : 3%
 ⑤ Functional additives(penetration agent, antifoaming agent, colorants: : 0.2~0.5%
 ⑥ Water : 66.5~66.8%
 
2. 적용대상(목재:특히 목재 건축물의 모든 부분)
 ① 서까래
 ② 기단부
 ③ 주춧대
 ④ 판자류
 ⑤ 내,외 장용의 모든 목재 건자재
 ⑥ 기타: 블라인드, MDF 등
 
3. 처리방법
 ① 분무(spraying)
 ② 담금(plunging)
 ③ 솔질(brushing)
4. 기본특성
 ① Ph: 2.0~3.0
 ② 밀도(20℃ 상온) : 1.21~1.22g/㎠
 ③ 사용량 : 100g~400g/㎡ (단, 목재의 내,외부 및 방염처리 정도에 따라 차등)
 ④ 효능기간 : 최소 5~16년
 ⑤ 방충효과
 ⑥ 환경 친화적
 ⑦ 인체 무해(무독성)
 

PIRILAX-LUX
Fire-retardant impregnation compound with intensified antiseptic for wood and wooden materials.
Purpose
 ㆍ Protects wood from ignition, stops flame spread in fire
 ㆍExterminates all species of fungus, mould, wood borers and termites
 ㆍ Extends lifetime of wooden buildings and structures
 
Recommended for
 ㆍ External and internal wood material surfaces in non-ventilated and damp places of habitable, industrial, office and comprehensive school buildings, child welfare institutions and other types of buildings
 ㆍ Internal and hidden wood material surfaces of all kinds of transport
 ㆍ Rafters, basements, socle, beams, downside of floor planks, row of beams of Russian baths
 ㆍ inside wood material surfaces and front side of roofs
 ㆍ Wood building materials and frameworks on season
 
Basic characteristics

 Aggregative state

 Transparent viscous yellow colored liquid. Ready to use. It is prohibited to dilute the compound with water

 Density at the temperature 20

 1.21 … 1.22 g/cm3

 Ph

 1.0 - 2.0

 Application rate to get the first group
of fire-retardant efficiency

 280 gram per square meter at the minimum

 Application rate to get hard-combustible,
non flame spreading wood with temperate
degree of smoke opacity.
( HNB 251, HNB 244, ROCT 12.1.044 )

 400 gram per square meter at the minimum

 Application rate to get antiseptic effect

 100 gram per square meter at the minimum

 Application procedure

 By brush, by spraying or by Plunging

 Application may be done at the temperature

 From ? 25℃ to + 50℃

  Period of fire-retardant properties on
the treated surface inside/outside

 16 years/5years

 Period of antiseptic properties on
the treated surface inside/outside

 25 years/10years

 Following varnish-and-paint covering

 In 15 days after treating with Pirilax work
surface may be covered with "Nortovski
Lacquer" for interior surface

 Surface exposed to permanent
washing-out and sunlight.
Surfaces contacting to soil.

 Refresh as necessary


Prepacking
Polyethylene barrels weighing 50kg and polyethylene bottles weighing 3.2 kg and 1.1 kg
Conditions of storage
Store in the polyethylene or non-corrosive containers at the temperature
from -50℃ to +80℃ . at the temperature -30℃ the compound partially
crystallizes, but it preserves its characteristic after defrosting.
Pre-packed compound Pirilax-lux is transported by railway or motor transport.
Consumption date ? 5 years from the data of manufacturing.
Each lot of the product is tested on the labware of the producer factory.